Freesole® Urethane Formula Shoe Repair



    Save your shoes, rescue your boots.

    Durable, flexible, and shock-absorbing, Freesole® Urethane Formula Shoe Repair is made from the same material as most shoe soles, so it can quickly reattach soles, rebuild worn heel and toe areas and create tough toe caps. Use Freesole to reattach and rebuild the soles of your boots and shoes. Freesole is part of a comprehensive line of Care and Repair products from McNett. With McNett, anyone can be a master of equipment repair.

    Works on all types of footwear, including boots, athletic shoes, climbing shoes, rollerblades and more.

    Freesole® Urethane Formula Shoe Repair is a patented urethane rubber repair system designed to restore and rebuild all types of footwear. Unaffected by heat or solvents, Freesole cures to a flexible thermoset rubber product providing superior adhesion, wear resistance, flexibility and waterproofing. The highly concentrated formula has minimal shrinkage: thick repairs can be made with only one permanent application. Ideal for worn heels, toes, sole and ski delaminations and more. Freesole will not separate with repeated flexing.

    Freesole® is part of the McNett GEAR AID™ product range.McNett Gear Aid Logo

     

    Please Note:
    To prevent Seam Grip, Aquasure and Freesole from hardening in the tube please follow the Instruction for use.


    Directions For Use:

     

    RESTORING WORN SOLES AND HEELS

    PREP: Roughen damaged area with sandpaper or wire brush. Use cloth to clean area with Cotol-240™plus Cure Accelerator/Pre-Cleaner, paint thinner or lighter fluid. Repeat cleaning for best adhesion.

    TAPE: For thick repairs at edge of sole or heel, place removable tape (cellophane or masking) around edge to form a dam. Double thickness of tape works best.

    APPLY: Squeeze FREESOLE Urethane Formula Shoe Repair onto area to be repaired, level with a stick, toothpick or knife. Keep repair facing up and level until FREESOLE becomes solid. Remove tape.

    DRY: Allow thin repairs to cure overnight; thick repairs 24-48 hours. Longer times may be needed in dry climates or times of low humidity such as cold winter days.

    FOR 2-4 HOUR DRY TIME: Mix in Cotol-240™plus Cure Accelerator/Pre-Cleaner.

     

    PROTECTING LEATHER UPPERS (BASEBALL, SOCCER, FOOTBALL, TENNIS SHOES/LEATHER BOOTS)

    1. Dull area by roughening with sandpaper, or by cleaning with FREESOLE Pre-Cleaner, acetone or nail polish remover.

    2. Mask off area to be coated, including sole edge if coating is to be extended to it. Keep area level and upright during application and curing, as for example, by cradling shoe in crumpled newspaper or box.

    3. Squeeze FREESOLE onto center or area, allow to self level, then spread to uniform thickness with toothpick. If FREESOLE flows onto tape, spread back towards center. (High curvature areas may be easier when coated in sections.)

    4. Remove tape after FREESOLE dries to a soft solid. Allow to cure overnight.
    REPAIRING SOLE SEPARATIONS * Roughen smooth surfaces. Clean surfaces to be joined as noted above. Apply FREESOLE to both surfaces. Allow to dry 15 minutes. Join and hold (clamp or tape) surfaces together overnight.

     

    WATERPROOFING SEAMS, STITCHING & WELTS

    Clean area as noted above. Apply FREESOLE along seam or between sole and upper directly from tube or with toothpick.

     

    FIXING HOLES & TEARS

    Roughen and clean damaged area as noted above. Use removable tape to create a backing. Apply FREESOLE to area and 6 mm beyond. Keep level and upright until cured. Remove tape.

     

    USEFUL TIPS

    TO SPEED UP DRY TIME, use cure accelerator. If cure accelerator is not used, apply FREESOLE then place object into a high-humidity environment. For example, an open box covered with a damp cloth. FOR 2-4 HOUR DRY TIME: Mix in Cotol-240™plus Cure Accelerator/Pre-Cleaner.

    CLEAN-UP: To remove FREESOLE from hands, use cloth soaked in paint thinner, nail polish remover or isopropyl alcohol.

    STORAGE: Advance contents to tube neck and replace original cap securely. Store partially used tube in freezer.

     

    How To Prevent Seam Grip, Aquasure and Freesole from Hardening in the Tube.

    Seam Grip, Freesole and Aquasure are moisture-cure adhesives. As soon as you pop the top on the tube and expose the adhesive to the moisture in the air, the countdown begins. Unfortunately, you are unable to stop the curing process, but you can slow it down by storing the adhesive in a dry environment like your freezer. We typically recommend storing as follows:

    Begin by advancing the contents to the tube neck to remove any air that may be trapped in the tube. Next wipe the tube threads clean to prevent the cap from sticking. Next, cap tightly. Next, place the adhesive in a plastic zip-lock bag. Next, store the adhesive in a dry environment like your freezer. While this will not stop the adhesive from curing, it will help slow things down. When ready to use, run the tube under warm water for about a minute.

    We give an un-opened tube of adhesive a two-year shelf life. The „batch-number“ will be crimped into the bottom of the tube. The adhesive is typically good for two years past the date of filling.

    What is it?

    When cured (dry) Freesole is a tough, urethane rubber that won’t crack.

    How it works—

    Freesole re-bonds to peeling soles and rands (the strip of rubber that circles the shoe above the sole). It dries to a solid rubber in 2-4 hours if mixed in Cotol-240™plus.

    When applied, Freesole cures by reacting with humidity in the air. It doesn’t ‘dry’ the way other glues do. It changes from a moderately thick liquid to a thin, flexible, elastic rubber.

    Once cured, it’s permanent. The repair will generally last the life of the item.

    Keep partially used tube in freezer.

     

    „Soccer cleats were seperating from sole. Taped off the shoe liked the product explained and this stuff is amazing. The cleats have been wet several times since and have wore them 30 plus times since appling the Freesole. No sign of the sole coming back apart. Thanks Freesole.“– Brian, Lafayette, Tennessee

    Ich  habe die gebrochene Sohle meiner „Teva“ – Outdoor-Sandale mit einem Teilinhalt einer Tube Freesole geklebt und nach 24 Stunden in die sich gebildete Rille noch etwas nachgegossen. Nach weiteren 24 Stunden habe ich es gewagt, die Sandale zu tragen und tue das seither jeden Tag, ohne dass sich an der Bruchstelle auch nur ein Haarriss gebildet hätte – Kompliment! Ich bin ja sowieso ein positiv eingestellter Mensch, aber mit diesem Zauberkleber haben Sie mich überglücklich gemacht!

    Werner V. aus Lüneburg, Germany

     

    „Great for extending the life of your kids‘ favorite shoes… THIS STUFF WORKS! „-Arkansas

     

    „In the past I have tried a variety of adhesives to reseal the connecting space between the sole and the leather in the area adjacent to the big toe. I have tried super-glue, epoxy, heck – even silicone bathroom caulk! Freesole is the best thing I have come across so far! It keeps the seal without interfering with the flexibility of the shoe itself. I sincerely suggest you give it a try…you will discover it is an excellent way to either extend the life of shoes you love, or simply don’t want to replace immediately! „– Sean, Hot Springs, AR

     

    „I’ve used this to repair ripped running and hiking shoes. I fill that gap with Freesole, and smooth the edges. I’ve used Freesole to repair worn spots on the bottom of running shoes. It’s liquid glue, so you have to build a dam, or a form with tape, toothpicks, popsicle sticks, whatever – then use gravity to get the Freesole to flow where you need it. Let dry 24hrs.“ -Trevor Francis, Chula Vista, CA

     

    ADDITIONAL USER COMMENTS –

    „I have used this product for some time now, and it does what it claims to do – save your boot heels and soles. It does not come off, it is fairly dense and abrasion resistant, and is easy to use. Hot tips: use a permanent magic marker to color the heel edge where the clear Freesole shows, and be sure and get the Primer/Accelerator for a secure bond. I have to wear orthopedic arch inserts, and subsequently grind down the outer edge of each heel in about 2 months. I have paid from $35 to $75 to get them repaired . Now, in about 30 minutes of prep and application time, I can get 3 or 4 patches out of one tube of Freesole.“– J. McSwain, Grapevine, TX

     



    eliminatingodours

    ELIMINATING ODOURS

    To remove strong odours from boots and shoes, spray with ReviveX® Footwear Odour Control. Thoroughly spray all surfaces – inside and out, including the tongue where odour causing bacteria likes to hide.

     

    TctRepTipsC1P5_trans

    KNIFE TIP

    To sharpen a knife, slide the knife across the sharpening stone as though you are trying to cut a thin slice off the stone. Hold the blade at roughly a 20 degree angle and draw it steadily. Be sure to count the number of strokes and do the same number of strokes on the opposite side.

     

    YOU MAY ALSO BE INTERESTED IN…