Aquasure® Urethane Repair Adhesive & Sealant
For Waders and Bivvies etc.
With Aquasure® by McNett® you can easily repair tears and rips in your favorite waders, bivvie and outdoor equipment. Aquasure is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going.
Don’t let a rip or a tear stop you. Aquasure will patch that hole in your raft, fix the gash in your fishing waders and make sure you stay dry.
Aquasure is all you need to keep your equipment going as long as you do.
Strong – permanent repairs
Flexible – transparent finish
Suitable for most materials
Ideal for infield or home repairs to bivvies and waders etc. Aquasure® urethane rubber adhesive provides a clear, strong and flexible finish suitable for permanent waterproof repairs to holes, tears or leaking seams in most types of fishing and water sports equipment, i.e.
Aquasure® is not suitable for use on Silnylon or any other silicone based materials
Aquasure® is part of the McNett GEAR AID™ product range.
Apply Aquasure® to tear on inside of wader and 6 mm beyond the tear. Cures over night.
For instant infield wader repairs, use the Aquasure® Instant Repair Kit. Apply a patch over tear on outside of wader. Apply Aquasure® to tear on inside of wader and 6 mm beyond the tear. Cover with another patch. Waders can be used immediately. Patches can be removed after 2-3 days.
Use Aquasure® for repairing wader seams. Turn waders inside out and examine seams and fabric for gaps. Apply Aquasure® directly to the seam, extending over seam and on to fabric by 6 mm. Use brush to work Aquasure® under fabric folds and into stitching. Allow Aquasure® to cure for 8 to 12 hours.
Use Aquasure® to repair felt soles. To repair peeling felt soles, clean and dry peeling area. Apply Aquasure® in gap and close. Can also be used to attach new felt soles. Use tape to hold repaired area closed overnight. Remove tape when fully cured.
Bivvie and Umbrella Repair
For bivvie or umbrella repairs, apply a patch over tear or hole on outside. Apply Aquasure® to tear on inside and 6 mm beyond the tear. For instant infield bivvie or umbrella repairs use Aquasure® Instant Repair Kit (contains 7 g Aquasure® and 3x McNett Tenacious Tape™ patches). Apply one patch over tear or hole on outside. Apply Aquasure® to tear on inside and 6 mm beyond the tear. Cover with another patch. Bivvie or umbrella can be used immediately. Patches can be removed in 2-3 days.
Aquasure® can also be used to repair loose seam tapes and to strengthen stress points.
Aquasure® can also repair fishing nets.
Use patch to create a backing and apply Aquasure® to the other side. Allow to cure for 24 hours then remove patch. The repair is strong, elastic and gentle on the fish.
Use Aquasure® to repair holes and tears in
luggage, i.e. rod holdalls, carryalls, rucksacks etc. Aquasure® can also be used to coat and protect high wear areas, i.e the base of carryalls, rucksacks, etc.
Kayak cockpits are notorious for cutting into spray skirts and causing exterior cracking. Apply spot applications of Aquaseal to permanently repair and protect both the interior and exterior.
Use Freesole® to permanently re-bond a peeling boot sole. First remove loose dirt and debris and then clean the area with rubbing alcohol and a stiff brush. Apply Freesole to the sole evenly.